Plastic recycling machinery

The description of every machine is within plastic recycling machine its relative section.

Generally in most plastic recycling lines, sorting of scraps may be the very first step.

Following the link you'll find some description of what manual and automatic sorting means, the bad and good aspects of each one.

Equipment used for sorting are Bales Breaker, used for bottles washing mainly, Conveyor Belts with different setup, Metal Separators and Detectors, with different configurations and Trommels.

After separation plastic scraps is going to size reduction; in this section we are discussing Granulators and Shredders.

An excellent separation is what makes the ultimate product pure therefore there exists a description of Dry out Separators and wet separation with Sink-Float Tanks and Hydrocyclones.

There is also some description of different ways of washing using Washing Machines with some small explanation about Pre-Washing systems, according with the scarps you will end up dealing with, as well as rinsing methods with Rinse-Dryers and drying finally, that is just about the most difficult things to achieve in plastic recycling, by way of mechanical Centrifuges.

Other equipment use are likewise Classifiers, Dosing Units, and Mixing Silo.

When your scrap is clean and dry, you should upgrade your final product according using what it is; because of this you really should go with an Agglomerator (densifier) specially in case of thin film cleansing, a Pelletizing Lines together with Polymer Filtration and speaking about PET and any Crystal Polymer, an IV upgrade through Stable State Polycondensation.

And do not forget dirt doesn't disappear but switches into Water; few phrases about a very important subject.

To see how to place everything mutually, please follow the hyperlink where there's a detailed explanation about how exactly and why you should, or shouldn't, use just about every device.

Write a comment

Comments: 0